408 Ford Turn-Key Carbureted

Starting at $10,999

The Turn-Key carbureted 408 Ford is an excellent choice for those looking for a Windsor based stroker engine to fit in place of an existing 351. The additional stroke provides a boost in power along with better throttle response, acceleration, and overall performance. Features forged pistons, hydraulic roller camshaft, and aluminum heads. Completely turn-key and dyno-tested with dual plane intake, carb w/ dual feed fuel log, MSD Pro Billet distributor, MSD Box/Coil and custom fit wires/looms. 

NOTE: Image shown may have upgraded options

Payment Plans Available!paytommorrow_logo Turn-Key 408 Ford Small Block Stroker Crate Engine: F408-HR-TK-CGet Pre-Approved

Fuel Type

Fuel Type

Pump Gas
Max RPM

Max RPM

6,000
Idle Quality

Idle Quality

Lopey
Best Use

Best Use

Street
Horsepower: 450
Torque: 475
Bore/Stroke: 4.030 x 4.000
Compression: 10:1
Fuel Type: Pump Gas, 93 AKI (USA) / 98 RON
Block: OEM 351W Core
Crankshaft: Cast Steel (Eagle or SCAT)
Rods: I-Beam, 5140 Forged Steel (Eagle or SCAT)
Pistons: 4032 Forged Aluminum 19cc dish (DSS Racing, JE, Racetec or Mahle)
Bearings: King or Clevite Rod & Mains, Durabond Camshaft
Camshaft: Hydraulic Roller (COMP, Howards or Cam Motion)
Heads: PM aluminum as cast 180/185 intake 58cc chamber
Valves: Forged Stainless
Rocker Arms: Billet Aluminum, Full Roller (Scorpion Racing or Prestige)
Intake: Edelbrock RPM Air Gap
Oil Pan: Street / Strip (Moroso, Canton or Champ)
Valve Covers: Polished Aluminum
Power Adder: Not Included
Fuel Delivery: Quick Fuel Carburetor
Ignition: MSD Pro Billet
Pulley Kit: Call for options
Dyno Testing Image

Dyno Testing

Dyno testing not included in long block price. Here at Prestige Motorsports, our “Dyno Promise” means that we dyno test every engine we build to verify the quality of our work, the integrity of each component, and the reliability of every engine we construct. Then, we deliver the dyno results for your project directly to you, the customer. Hours for dyno testing will be calculated with the purchase of the fuel and ignition group per engine order.

Engines will produce +/- 2% of advertised power at the flywheel. Advertised power levels are achieved using an electric water pump and specific induction and exhaust systems. Power will vary after pulley systems are installed or if changes are made to the induction or exhaust system (e.g. camshaft, cylinder head, compression, intake manifold, exhaust headers, air filters, etc.). Chassis dyno results measure power at the wheels and only calculate flywheel horsepower. Wheel horsepower is affected by a variety of vehicle-specific criteria including driveline design, body and chassis flex, air intake location, etc. Therefore, calculating flywheel horsepower from wheel horsepower is not an accurate representation of actual flywheel horsepower.

Dyno Graph Image
Warranty Image

Warranty

This Prestige Motorsports engine is built to order and comes with a 3-year, unlimited miles warranty. Our warranty covers the base engine from intake manifold to oil pan.

Turn-Key 408 Ford Small Block Stroker Crate Engine: F408-HR-TK-C

Upgrades & Add-ons

Ready to upgrade your project? Add a kit from each area below to convert your base engine into a turn-key package. Kits come installed and dyno tested with your engine. Please note that not all of the options listed below are available for every engine. Contact us for more details.

Fuel Supply

Don’t waste time and frustration on that old carburetor. Fuel your engine with a dyno tested system for proven performance.

Ignition System

You'll need a top-notch ignition system for trouble-free performance. Let us customize one for you with everything needed to keep the spark alive.

Pulley Kits & Accessories

Pulleys drive vital components. Let us install a high-quality kit that keeps your engine running and provides max clearance for cooling systems. Available in multiple finishes!